WELL C 80-150

Multistage monoblock submerged pumps for domestic use, 2 poles, from 0.6kW to 1.1kW,
Max head: 67 m,
Max capacity: 110 L/min

 

Use

Multistage monoblock submersible pumps ready to use for domestic utilize. Suitable for clean water without sand. These models are usually applied to pump water from traditional open wells or to give pressure to the hydraulic plant of houses. In these models the motor is integrated with the hydraulic part and they are supplied with 15 metres cable with plug and a control box.

 Operation conditions

Max liquid temperature: 30 °C (86 °F)

pH: 6-8

Max density: 1000 kg/m³

 

 

Performance curve:

 

Models Capacity
L/min 10 20 30 40 50 60 70 80 90 100 110
m3/h 0.6 1.2 1.8 2.4 3.0 3.6 4.2 4.8 5.4 6.0 6.6
L/s 0.17 0.33 0.50 0.67 0.83 1.00 1.17 1.33 1.50 1.67 1.83
WELL C 80 Head (m) 47 44 42 38 35 32 27 23 19 12 5
WELL C 150 65 60 56 52 48 43 37 32 25 19 10

 

 

Technical characteristics:

Models WELL C 80 WELL C 150
Number of stages 4 7
Outlet 1"1/4 - DN 32 threaded
Motor Dry. Insulation class: F
Motor protection Manual reset protection on the control box at the end of the cable
Mechanical seal  
Float-switch Available with or without float-switch  Available only without float-switch 
Cable    
Capacitor    
IP 68
Max quantity of sand No sand into the water allowed

 

 

Electric characteristics:

Models Power Nos. poles R.p.m. Voltage Ampere
WELL C 80 0.8HP - 0.6kW 2 2850 230V/50Hz/1 4,4 A
WELL C 150 1.5HP - 1.1kW 2 2850 230V/50Hz/1 7,5 A

 

 

Materials:

Impellers Noryl                                                                          
Diffusers Noryl
External case Stainless steel ASI 304
Suction grid Stainless steel ASI 304
Motor frame  
Motor shaft Stainless steel ASI 420

 

 

Weight and dimensions:

 

 

Models Outlet A B C D E Weight
WELL C 80 1"1/4 - DN 32 500mm 128mm (5") 615mm 270mm 200mm 14kg
WELL C 80 float-switch 1"1/4 - DN 32 500mm 128mm (5") 860mm 220mm 170mm 16kg
WELL C 150 1"1/4 - DN 32 570mm 128mm (5") 615mm 270mm 200mm 19kg

 

 

Optionals:

No-return valve No-return check valve 1"1/4
Sounding probes

To avoid dry running (only for the pumps without float-switch).

To connect the sounding probes it is needed an additional electric board.

Pressure system set Presscontrol
Manometer, pressure switch and expansion tank

 

WELL C 80-150 ENG - REV. 2.0 - 29/08/2017

Comex Srl Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.