WELL P 100 BRASS

Peripheral monoblock submerged pump for domestic use, 2 poles, 0.75kW,
Max head: 60 m,
Max capacity: 55 L/min

 

Use

Peripheral monoblock submersible pump ready to use for domestic utilize. Suitable for clean water without sand. This model is usually applied to pump water from traditional open wells or to give pressure to the hydraulic plant of small houses. In this model the motor is integrated with the hydraulic part and it is supplied with 15 metres cable with plug and a control box.

 Operation conditions

Max liquid temperature: 30 °C (86 °F)

pH: 6-8

Max density: 1000 kg/m³

Max immersion depth: 50m

 

 

Performance curve:

 

Model Capacity
L/min 10 20 30 40 50 60
m3/h 0,6 1,2 1,8 2,4 3,0 3,6
L/s 0,17 0,33 0,50 0,67 0,83 1,00
WELL P 100 BRASS Head (m) 49 40 29 19 8 0

 

 

Technical characteristics:

Number of stages 1
Outlet 1" - DN 25 threaded
Motor Dry. Insulation class: F
Motor protection Manual reset protection on the control box at the end of the cable
Mechanical seal  
Float-switch Available only without float-switch 
Cable  
Capacitor  
IP 68
Max quantity of sand 10 gr/m3

 

 

Electric characteristics:

Model Power Nos. poles R.p.m. Voltage Ampere
WELL P 100 BRASS 1.0HP - 0.75kW 2 2850 230V/50Hz/1 6,0 A

 

 

Materials:

Impeller Brass
Pump body Brass
Motor external case Stainless steel AISI 304
Suction grid Stainless steel AISI 304
Motor shaft Stainless steel AISI 430

 

 

Weight and dimensions:

 

Model Outlet             Dimensions (mm)               Weight   
female threaded A B C D E (kg)
WELL P 100 BRASS 1" - DN 25 495 95 (4") 585 265 290 14

 

 

Optionals:

No-return valve No-return check valve 1"
Sounding probes

To avoid dry running. To connect the sounding probes it is needed an additional electric board.

Pressure system set Presscontrol
Manometer, pressure switch and expansion tank

 

WELL P 100 BRASS ENG - REV. 2.0 - 29/08/2017

Comex Srl Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.