| Use |
Multistage monoblock submersible pumps ready to use for domestic utilize. Suitable for clean water without sand. These models are usually applied to pump water from traditional open wells or to give pressure to the hydraulic plant of houses. In these models the motor is integrated with the hydraulic part and they are supplied with 15 metres cable with plug and a control box. |
| Operation conditions |
Max liquid temperature: 30 °C (86 °F) pH: 6-8 Max density: 1000 kg/m³ |
Performance curve:
| Models | Capacity | |||||||||||
| L/min | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | |
| m3/h | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | 4.2 | 4.8 | 5.4 | 6.0 | 6.6 | |
| L/s | 0.17 | 0.33 | 0.50 | 0.67 | 0.83 | 1.00 | 1.17 | 1.33 | 1.50 | 1.67 | 1.83 | |
| WELL C 80 | Head (m) | 47 | 44 | 42 | 38 | 35 | 32 | 27 | 23 | 19 | 12 | 5 |
| WELL C 150 | 65 | 60 | 56 | 52 | 48 | 43 | 37 | 32 | 25 | 19 | 10 | |
Technical characteristics:
| Models | WELL C 80 | WELL C 150 | |||||
| Number of stages | 4 | 7 | |||||
| Outlet | 1"1/4 - DN 32 threaded | ||||||
| Motor | Dry. Insulation class: F | ||||||
| Motor protection | Manual reset protection on the control box at the end of the cable | ||||||
| Mechanical seal | |||||||
| Float-switch | Available with or without float-switch | Available only without float-switch | |||||
| Cable | |||||||
| Capacitor | |||||||
| IP | 68 | ||||||
| Max quantity of sand | No sand into the water allowed | ||||||
Electric characteristics:
| Models | Power | Nos. poles | R.p.m. | Voltage | Ampere |
| WELL C 80 | 0.8HP - 0.6kW | 2 | 2850 | 230V/50Hz/1 | 4,4 A |
| WELL C 150 | 1.5HP - 1.1kW | 2 | 2850 | 230V/50Hz/1 | 7,5 A |
Materials:
| Impellers | Noryl |
| Diffusers | Noryl |
| External case | Stainless steel ASI 304 |
| Suction grid | Stainless steel ASI 304 |
| Motor frame | |
| Motor shaft | Stainless steel ASI 420 |
Weight and dimensions:
| Models | Outlet | A | B | C | D | E | Weight |
| WELL C 80 | 1"1/4 - DN 32 | 500mm | 128mm (5") | 615mm | 270mm | 200mm | 14kg |
| WELL C 80 float-switch | 1"1/4 - DN 32 | 500mm | 128mm (5") | 860mm | 220mm | 170mm | 16kg |
| WELL C 150 | 1"1/4 - DN 32 | 570mm | 128mm (5") | 615mm | 270mm | 200mm | 19kg |
Optionals:
| No-return valve | No-return check valve 1"1/4 |
| Sounding probes |
To avoid dry running (only for the pumps without float-switch). To connect the sounding probes it is needed an additional electric board. |
| Pressure system set | Presscontrol |
| Manometer, pressure switch and expansion tank |
WELL C 80-150 ITA - REV. 2.0 - 21/10/2017
File di specifiche:
