ASPIRA 50

Pump in stainless steel for suction up to 2mm, 2 poles, 0.37kW,
Max head: 7 m,
Max capacity: 150 L/min

Description

Small pump in stainless steel AISI 304 with the suction positioned on the bottom of the pump. This model permits to suck the water up to 2 millimeters from the ground. Moreover, contrarily to other similar pumps, ASPIRA 50 is able to suck water even if the initial level of the water is only a few centimeters. The pump is supplied with a float-switch and it can be used as a standard pump (working with the float-switch) or blocking the float-switch in "ON" position in the apposite connection when the pump must suck water up to 2 millimeters. Thanks to these characteristics this model is ideal to drain the water from flats floor after floods when there is no pit to collect water. The pump is supplied with a hose connection including a no-return valve.

Use

The ASPIRA 50 cannot be used with dirty water nor in fix position always immerged into water.

Operation conditions

Max liquid temperature: 35 °C (95 °F)

pH: 6-10

Max density: 1000 kg/m³

Max immersion depth: 2m

 

 

Performance curve:

 

ATTENTION: As the suction is on the bottom, the performance gets reduced when the pump lays on the ground and cannot be kept lift up

Model                                        Head (m)                                       
1 2 3 4 5 6 7
Capacity
ASPIRA 50     L/min    130 110 88 68 45 21 2
m3/h 7,8 6,6 5,3 4,1 2,7 1,3 0,1
L/s 2,17 1,83 1,47 1,13 0,75 0,35 0,03

 

 

Technical characteristics:

Outlet 1"1/4 - DN 32 vertical threaded                                                         
Solid passage 2 mm
Impeller Multi-channel open impeller
Mechanical seal Mechanical seal in allumina / graphite / NBR   
Motor Dry. Insulation class F
Motor protection Automatic reset built-in motor protection
Float-switch

The model is supplied with a float-switch that can be blocked in the "ON" position when the pump must suck up to 2mm from the ground. In this case the pump must be turned off manually by the user.

Cable

10 meters cable H07RNF 3G0.75 with plug. 

Capacitor 5μF - 450V
IP 68

 

 

Electric characteristics:

Model Power Nos. poles R.p.m. Voltage Ampere
ASPIRA 50 0.5 HP - 0.37kW 2 2850 230V/50Hz/1 1,5 A

 

 

 Materials:

Impeller                  Noryl                                                                        
External case Stainless steel AISI 304
Bottom grid Stainless steel AISI 304
Motor case Stainless steel AISI 304
Motor shaft Stainless steel AISI 304
Packing set NBR
Handle Polypropylene

 

 

Weight and dimensions:

Model Outlet             Dimensions (mm)               Weight   
female threaded A B C D E (kg)
ASPIRA 50   1"1/4 - DN 32 285 160 220 165 310 4

 

 

Optionals:

Connections Hose connection with built-in no-return valve supplied as a standard with the pump
No-return valve It is already included into the hose connection supplied with the pump
Electric board Model F5-0.5/3-1 to protect the pump with a manual reset thermal protection and to connect a float-switch

 

 

ASPIRA 50 ENG - REV. 2.0 - 29/08/2017

Comex Srl Società Unipersonale, Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.