VORTEX 2700-3400

Professional submersible pumps in cast-iron for heavy sewage water, 4 poles, from 20kW to 25kW,
Max head: 32 m,
Max capacity: 7.200 L/min

 

Description

Pump in cast-iron with single-channel impeller. This kind of impeller grants a good free passage for the solid and fibrous parts contained into the water but it gives also an higher flow and head than the "vortex" impeller. This model with an heavy duty construction, double mechanical seals and 1450 rpm motor can be used to pump heavy sewage water.

Use

The VORTEX 2700 and VORTEX 3400 are usually installed into big block of flats' cellars to drain the dirty water or in public sewage water nets. These models are also often used in farms to pump out the manure of the stables, in industrial plants, in sewage water treatment plants, in sludges treatment plants, etc. These models cannot be used to pump water containing stones.

Operation conditions

Max liquid temperature: 50 °C (122 °F)

pH: 6-10

Max density < 1100 kg/m³

Max immersion depth: 20m

  

 

Performance curve:

Models                             Head (m)
4 8 12 16 20 24 28 32
Capacity
VORTEX 2700 L/min 6800 5970 4800 3720 2300 1190 0  
m3/h 408,0 358,2 288,0 223,2 138,0 71,4 0  
L/s 113,33 99,50 80,00 62,00 38,33 19,83 0  
VORTEX 3400 L/min   7200 6000 5010 3750 2680 1350    0   
m3/h   432,0 360,0 300,6 225,0 160,8 81,0 0
L/s   120,00 100,00 83,50 62,50 44,67 22,50 0

 

 

Technical characteristics:

Outlet 6" - DN 150 horizontal flanged
Solid passage 120mm
Impeller Single-channel impeller
Mechanical seal

Double mechanical seal in oil chamber. The lower one in silicum carbide / silicum carbide / Viton, the upper one in silicum carbide / silicum carbide / Viton.

Motor Dry. Insulation class: F.
Motor protection By a fused remote isolator switch at customer's care (see optional electric board)
Float-switch

The pump is supplied without float-switch

Cable

10 meters cable H07RNF 7x4mm2 + 3x1mm2 including thermal probe and conductivity probe, without plug

Capacitor -
IP 68

  

 

Electric characteristics:

Models                      Power        Nos. poles R.p.m.           Voltage                Ampere     
VORTEX 2700 27HP - 20kW 4 1450 400-690V/50Hz/3 39,7 - 22,9 A
VORTEX 3400 34HP - 25kW 4 1450 400-690V/50Hz/3 47,7 - 27,6 A

 

 

Materials:

Impeller            Cast-iron GG 25                                                                             
Pump cover Cast-iron GG 25
Motor case Cast-iron GG 25
Pump body Cast-iron GG 25
Pump support Galvanized iron
Motor shaft Inox AISI 420
Packing set NBR

 

 

Weight and dimensions:

 

Models                           Outlet                             Dimensions (mm)                        Weight   
flanged A B C D E F (kg)
VORTEX 2700   6" - DN 150 997 641 325 670 570 950 308
VORTEX 3400 6" - DN 150 997 641 325 670 570 950 320

 

 

 Optionals:

Models VORTEX 2700 VORTEX 3400
Connections 6"-DN 150 counterflange
DN 150 90° coupling hoses in cast-iron with flange
Coupling foot MODEL 6-DN150VTX1500-4700: automatic coupling foot with DN150 connection for VORTEX 1500-4700 
No-return valve Professional ball check valve flanged 6"-DN150 in cast-iron
Float-switch 10 or 20 metres cable float-switch to be connected to an electric board
Electric board Model F1-27-3 Model F1-34-3
These professional electric boards provide a manual reset thermal protection to protect the motor of the pump and they permit the connection of a float-switch. Moreover these electric boards have a control of lack or invertion of phases. The connection of the three-phase pump to an electric board is mandatory.

 

 

VORTEX 2700-3400 ENG - REV. 2.0 - 03/12/2018

Comex Srl Società Unipersonale, Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.