MAG

Surface magnetic driven pump with pump body and impeller in plastic, from 30W to 250W,
Max head: 9m,
Max capacity: 109L/min

 

Description

Magnetic driven pumps with single impeller. The drive magnet is connected to the motor shaft and turns around the pump body. The pump body made in glassfibre reinforced polypropylene is a completely sealed unique casing; inside this casing there is the impeller that contains ferrite magnets. When the drive magnet turns with the motor it hauls the magnet of the impeller. Thanks to that principle there is no need of the traditional mechanical seal because the pump body is a closed casing.

Use

These pumps can be used for a wide range of corrosive liquids: acids, alkaline liquids, solvents, salted water, etc. These models are not suitable to pump fluids containing solid parts.

Operation conditions

Max liquid temperature: 60 °C (140 °F)

Max density: 1100kg/m3

Max viscosity: 30 cPs

 

 

Performance curve:

 

Models Capacity
L/min   0   10 20 30 40 50 60 70 80 90 100
m3/h 0 0,6 1,2 1,8 2,4 3,0 3,6 4,2 4,8 5,4 6,0
L/s 0 0,17 0,33 0,50 0,67 0,83 1,00 1,17 1,33 1,50 1,67
MAG 04 Head (m) 3,2 2,8 1,6                
MAG 08 3,6 3,4 2,4 1,7              
MAG 13 5,5 5,5 5 4,5 3,5 2,5 1        
MAG 20 7,5 7,5 7,5 7 6,5 6 5 3,5 1,5    
MAG 33 9 9 8,5 8 7,5 7 6,5 5,5 4,5 3,5 2

 

Technical characteristics:

Models MAG 04 MAG 08 MAG 13 MAG 20 MAG 33
Number of stages 1
Motor Insulation class: F
Motor protection Automatic reset built-in thermal protection
Mechanical seal -
Capacitor          
IP 44

 

Electric characteristics:

Models Power Nos. poles R.p.m. Voltage Amp
MAG 04 0.04HP - 30W 2 2850 230V/50Hz/1 0,13 A
MAG 08 0.08HP - 60W 2 2850 230V/50Hz/1 0,24 A
MAG 13 0.13HP - 100W 2 2850 230V/50Hz/1 0,6 A
MAG 20 0.20HP - 150W 2 2850 230V/50Hz/1 1,6 A
MAG 33 0.33HP - 250W 2 2850 230V/50Hz/1 1,8 A

 

Materials:

Impeller Glassfibre reinforces polypropylene                                      
Pump body Glassfibre reinforces polypropylene   
Pump support Glassfibre reinforces polypropylene   
Motor shaft Ceramic
Packing set FPM

 

 

Weight and dimensions:

 

Models Inlet Outlet Dimensions (mm) Weight
male threaded male threaded A B C D E F (kg)
MAG 04 3/4" - DN 20 3/4" - DN 20 218 92 129 300 210 280 2,2
MAG 09 3/4" - DN 20 3/4" - DN 20 254 120 134 300 210 280 3,0
MAG 13 3/4" - DN 20 3/4" - DN 20 272 95 134 320 210 280 3,5
MAG 20 1" - DN 25 1" - DN 25 286 130 160 320 210 280 7,5
MAG 33 1" - DN 25 1" - DN 25 345 156 175 380 220 280 9,5

 

MAG EN - REV. 2.0 - 19/09/2017

Comex Srl Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.