CMV SS40

Centrifugal vertical multistage surface pumps with impellers and diffusers in stainless steel, in-line connections, 2 poles, from 7.5kW to 18.5kW,
Max head: 193m,
Max capacity: 667L/min

 

Use

Centifugal vertical multistage pumps with stainless steel impellers and diffusers. In-line connections. Pumps to be used only with clean water. These models are usually used to increase the water pressure in the houses or in industrial plants and they can be used also with hot water. Silent working. These models are not suitable to pump dirty water.

Operation conditions

Max liquid temperature: 100 °C (212 °F)

 

 

Performance curve:

 

Models

 

CMV SS40

Capacity
L/mim  0  60 120 180 240 300 360 420 480 540 600 667
m3/h 0 3,6 7,2 10,8 14,4 18,0 21,6 25,2 28,8 32,4 36,0 40,0
L/s 0 1,00 2,00 3,00 4,00 5,00 6,00 7,00 8,00 9,00 10,00 11,12
1000 Head (m) 80 80 79 77 74 73 68 64 58 54 46 37
1500 118 118 116 114 110 106 100 94 85 77 67 55
2000 150 150 149 148 145 140 133 127 116 107 94 74
2500 193 193 192 188 184 178 169 162 149 137 120 97

 

Technical characteristics:

Models CMV SS40 1000 CMV SS40 1500 CMV SS40 2000 CMV SS40 2500
Number of stages 4 6 8 10
Motor Insulation class: F
Motor protection By a fused remote isolator switch at customer's care (see optional electric board) for three-phase models
Mechanical seal Mechanical seal in silicum carbide/ graphite / NBR
Capacitor -
IP 55

 

 

Electric characteristics:

Models Power Nos. poles R.p.m. Voltage Ampere
CMV SS40 1000  10.0HP - 7.5kW 2850 230-400V/50Hz/3  23,4-13,5 A
CMV SS40 1500  15.0HP - 11.0kW  2  2850 230-400V/50Hz/3  34,6-20,0 A
CMV SS40 2000 20.0HP - 15.0kW 2 2850 230-400V/50Hz/3 45,9-26,5 A
CMV SS40 2500 25.0HP - 18.5kW 2 2850 230-400V/50Hz/3 55,8-32,2 A

 

 

Materials:

Impeller Stainless steel AISI 304                                                  
Diffusers Stainless steel AISI 304
Pump body Stainless steel AISI 304  
Suction body Stainless steel AISI 304
Discharge body Stainless steel AISI 304
Motor shaft  
Packing set NBR

 

 

Weight and dimensions:

 

Models Inlet Outlet A B C D E F Weight
CMV SS40 1000 2"1/2 - DN 65 flanged 2"1/2 - DN 65 flanged 1145mm 320mm 105mm 400mm 350mm 1200mm 150kg
CMV SS40 1500 2"1/2 - DN 65 flanged 2"1/2 - DN 65 flanged 1450mm 320mm 105mm 500mm 400mm 1500mm 230kg
CMV SS40 2000 2"1/2 - DN 65 flanged 2"1/2 - DN 65 flanged 1590mm 320mm 105mm 500mm 400mm 1700mm 258kg
CMV SS40 2500 2"1/2 - DN 65 flanged 2"1/2 - DN 65 flanged 1790mm 320mm 105mm 500mm 400mm 1900mm 290kg

 

 Optionals:

Valves          2"1/2 foot valve                                            

 

CMV SS40 EN - REV. 2.0 - 15/09/2017

Comex Srl Società Unipersonale, Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.