| Use |
Self-priming pump with single impeller in brass for clean water. This model is usually used for small irrigations systems sucking the water from rivers or ponds or they are installed in small houses to increase the pressure of the water; in this case it is often connected to a pressure system. This model is not suitable to pump dirty water. |
| Operation conditions |
Max liquid temperature: 50 °C (122 °F) Max suction depth: 9m |
Performance curve:
| Model | Capacity | |||||||
| L/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | |
| m3/h | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | |
| L/s | 0 | 0.17 | 0.33 | 0.50 | 0.67 | 0.83 | 1.00 | |
| SUPERJET 100 | Head(m) | 43 | 39 | 36 | 30 | 24 | 14 | 3 |
Technical characteristics:
| Number of stages | 1 | ||||||
| Motor | Insulation class: F | ||||||
| Motor protection | Automatic reset built-in thermal protection | ||||||
| Mechanical seal | Mechanical seal in allumina / graphite / NBR | ||||||
| Capacitor | |||||||
| IP | 44 | ||||||
Electric characteristics:
| Model | Power | Nos. poles | R.p.m. | Voltage | Ampere |
| SUPERJET 100 | 1.0HP - 0.75kW | 2 | 2850 | 230V/50Hz/1 | 4,5 A |
Materials:
| Impeller | Brass |
| Pump body | Cast-iron GG 20 |
| Pump support | Cast-iron GG 20 |
| Diffuser | Noryl |
| Motor shaft | Stainless steel AISI 416 B |
| Packing set | NBR |
Weight and dimensions:
| Model | Inlet | Outlet | A | B | C | D | E | F | Weight |
| SUPERJET 100 | 1" - DN 25 threaded | 1" - DN 25 threaded | 425mm | 185mm | 200mm | 440mm | 220mm | 240mm | 17kg |
Optionals:
| Valves | 1" foot valve necessary for the priming of the pump |
| Connections |
Professional straight brass connection 1" in three pieces for inlet professional 90° brass connection 1" in three-pieces for outlet |
| Pressure system set | Presscontrol |
| Manometer, pressure switch and expansion tank |
SUPERJET 100 ENG - REV. 2.0 - 08/09/2017
Detail file:
