VORTEX 100 SS 316

Submersible pump in stainless steel AISI 316 for sewage water, 2 poles, 0.75kW,
Max head: 12 m,
Max capacity: 350 L/min

 

Description

Pump completely in stainless steel AISI 316 with "vortex" impeller. When the impeller turns, it creates a vortex pushing the water through the pump body. As the impeller is positioned in the upper part of the pump body it permits a wide free passage for the solid parts contained into the water. 

The VORTEX 100 SS 316 is suitable for aggressive sewage effluents, for acid or alkaline solutions and for salty water.

Use

The VORTEX 100 SS 316 is usually installed in industrial treatment plants when the sewage effluents are corrosive, aggressive, acid or alkaline or when sea water must be pumped as in the fishing industries. VORTEX 100 SS 316 is particularly used also in biogas plants. This model cannot be used to pump water containing stones.

Operation conditions

Max liquid temperature: 50 °C (122 °F)

pH: 3-14

Max density < 1100 kg/m³

Max immersion depth: 30m

 

 

Performance curve:

 

Model Head (m)
2 3 4 5 6 7 8 9 10 11
Capacity
VORTEX 100 SS 316 L/min 340 320 290 262 230 195 165 125 82 45
m3/h 20,4 19,2 17,4 15,7 13,8 11,7 9,9 7,5 4,9 2,7
L/s 5,67 5,33 4,83 4,37 3,83 3,25 2,75 2,08 1,37 0,75

 

 

Technical characteristics:

Outlet 2" - DN 50 vertical flanged with counterflange threaded
Solid passage 35mm
Impeller Back open impeller "vortex" type.
Mechanical seal Double indipendent mechanical seal in oil chamber. The lower one in silicum carbide / silicum carbide / Viton, the upper one in ceramic / graphite / Viton + NBR oil seal
Motor Dry. Insulation class: F
Motor protection Automatic reset built-in thermal protection
Float-switch

The model can be supplied with or without float-switch

Cable

10 meters cable H07RNF 3G1 with plug for single-phase

Capacitor 12μF - 450V
IP 68

 

 

Electric characteristics:

Model  Power  Nos. poles    R.p.m.   Voltage  Ampere 
VORTEX 100 SS 316    1.0 HP - 0.75kW   2 2850  230V/50Hz/1 5,3 A

 

 

Materials:

Impeller                     Stainless steel AISI 316                                                                  
Pump cover Stainless steel AISI 316
Motor case Stainless steel AISI 316
Pump body Stainless steel AISI 316
Pump support Stainless steel AISI 316
Motor shaft Stainless steel AISI 316
Packing set Viton

 

 

Weight and dimensions:

Model Outlet          Dimensions (mm)            Weight  
flanged and female threaded A B C D E (kg)
VORTEX 100 SS 316 2" - DN 50 427 237 260 190 480 16

 

 

Optionals:

Connections Professional straight brass connection 2" in three pieces
Straight plastic connection 2" in one piece supplied as standard with the pump 
No-return valve Professional ball check valve threaded 2" in cast-iron
Float-switch 10 or 20 metres cable float-switch to be connected to an electric board in case it is not possible to use the standard float-switch connected to the pump
Electric board Model F5-0.5/3-1 with a manual reset thermal protection to protect the motor of the pump and it permits the connection of a float-switch.

 

 

VORTEX 100 SS 316 ENG - REV. 2.0 - 29/08/2017

Comex Srl Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.