| Description |
Magnetic driven pumps with single impeller. The drive magnet is connected to the motor shaft and turns around the pump body. The pump body made in glassfibre reinforced polypropylene is a completely sealed unique casing; inside this casing there is the impeller that contains ferrite magnets. When the drive magnet turns with the motor it hauls the magnet of the impeller. Thanks to that principle there is no need of the traditional mechanical seal because the pump body is a closed casing. |
| Use |
These pumps can be used for a wide range of corrosive liquids: acids, alkaline liquids, solvents, salted water, etc. These models are not suitable to pump fluids containing solid parts. |
| Operation conditions |
Max liquid temperature: 60 °C (140 °F) Max density: 1100kg/m3 Max viscosity: 30 cPs |
Performance curve:
| Models | Capacity | |||||||||||
| L/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | |
| m3/h | 0 | 0,6 | 1,2 | 1,8 | 2,4 | 3,0 | 3,6 | 4,2 | 4,8 | 5,4 | 6,0 | |
| L/s | 0 | 0,17 | 0,33 | 0,50 | 0,67 | 0,83 | 1,00 | 1,17 | 1,33 | 1,50 | 1,67 | |
| MAG 04 | Head (m) | 3,2 | 2,8 | 1,6 | ||||||||
| MAG 08 | 3,6 | 3,4 | 2,4 | 1,7 | ||||||||
| MAG 13 | 5,5 | 5,5 | 5 | 4,5 | 3,5 | 2,5 | 1 | |||||
| MAG 20 | 7,5 | 7,5 | 7,5 | 7 | 6,5 | 6 | 5 | 3,5 | 1,5 | |||
| MAG 33 | 9 | 9 | 8,5 | 8 | 7,5 | 7 | 6,5 | 5,5 | 4,5 | 3,5 | 2 | |
Technical characteristics:
| Models | MAG 04 | MAG 08 | MAG 13 | MAG 20 | MAG 33 | ||||||||||||||
| Number of stages | 1 | ||||||||||||||||||
| Motor | Insulation class: F | ||||||||||||||||||
| Motor protection | Automatic reset built-in thermal protection | ||||||||||||||||||
| Mechanical seal | - | ||||||||||||||||||
| Capacitor | |||||||||||||||||||
| IP | 44 | ||||||||||||||||||
Electric characteristics:
| Models | Power | Nos. poles | R.p.m. | Voltage | Amp |
| MAG 04 | 0.04HP - 30W | 2 | 2850 | 230V/50Hz/1 | 0,13 A |
| MAG 08 | 0.08HP - 60W | 2 | 2850 | 230V/50Hz/1 | 0,24 A |
| MAG 13 | 0.13HP - 100W | 2 | 2850 | 230V/50Hz/1 | 0,6 A |
| MAG 20 | 0.20HP - 150W | 2 | 2850 | 230V/50Hz/1 | 1,6 A |
| MAG 33 | 0.33HP - 250W | 2 | 2850 | 230V/50Hz/1 | 1,8 A |
Materials:
| Impeller | Glassfibre reinforces polypropylene |
| Pump body | Glassfibre reinforces polypropylene |
| Pump support | Glassfibre reinforces polypropylene |
| Motor shaft | Ceramic |
| Packing set | FPM |
Weight and dimensions:
| Models | Inlet | Outlet | Dimensions (mm) | Weight | |||||
| male threaded | male threaded | A | B | C | D | E | F | (kg) | |
| MAG 04 | 3/4" - DN 20 | 3/4" - DN 20 | 218 | 92 | 129 | 300 | 210 | 280 | 2,2 |
| MAG 09 | 3/4" - DN 20 | 3/4" - DN 20 | 254 | 120 | 134 | 300 | 210 | 280 | 3,0 |
| MAG 13 | 3/4" - DN 20 | 3/4" - DN 20 | 272 | 95 | 134 | 320 | 210 | 280 | 3,5 |
| MAG 20 | 1" - DN 25 | 1" - DN 25 | 286 | 130 | 160 | 320 | 210 | 280 | 7,5 |
| MAG 33 | 1" - DN 25 | 1" - DN 25 | 345 | 156 | 175 | 380 | 220 | 280 | 9,5 |
MAG - REV. 2.0 - 19/09/2017
File di specifiche:
