| Use |
Centifugal pumps with single impeller in cast-iron for clean water. These models are usually used for big water decanting and irrigations systems when it is needed a large quantity of water at a low pressure. These models are not suitable to pump dirty water. |
| Operation conditions |
Max liquid temperature: 40 °C (104 °F) |
Performance curve:
| Models | Capacity | ||||||
| L/min | 0 | 300 | 600 | 900 | 1200 | 1500 | |
| m3/h | 0 | 18.0 | 36.0 | 54.0 | 72.0 | 90.0 | |
| L/s | 0 | 5.00 | 10.00 | 15.00 | 20.00 | 25.00 | |
| CIR 150 | Head (m) | 12 | 10 | 7 | |||
| CIR 200 | 14 | 12 | 9 | 5 | |||
| CIR 300 | 15 | 13 | 11 | 8 | |||
| CIR 550 | 19 | 17 | 16 | 14 | 11 | 7 | |
Technical characteristics:
| Models | CIR 150 | CIR 200 | CIR 300 | CIR 550 |
| Number of stages | 1 | |||
| Motor | Insulation class: F | |||
| Motor protection | Automatic reset built-in thermal protection for single-phase models; by a fused remote isolator switch at customer's care (see optional electric board) for three-phase models | |||
| Mechanical seal | Mechanical seal in allumina / graphite / NBR | |||
| Capacitor | ||||
| IP | 44 | |||
Electric characteristics:
| Models | Power | Nos. poles | R.p.m. | Voltage | Ampere |
| CIR 150 | 1.5HP - 1.1kW | 2 | 2850 | 230V/50Hz/1 | 8,0 A |
| CIR 200 | 2.0HP - 1.5kW | 2 | 2850 | 230V/50Hz/1 | 10,0 A |
| CIR 300 | 3.0HP - 2.2kW | 2 | 2850 | 230-400V/50Hz/3 | 9,5-5,2 A |
| CIR 550 | 5.0HP - 4.0kW | 2 | 2850 | 230-400V/50Hz/3 | 14,0-9,0 A |
Materials:
| Impeller | Cast-iron GG20 |
| Pump body | Cast-iron GG 20 |
| Pump support | Cast-iron GG 20 |
| Motor shaft | |
| Packing set | NBR |
Weight and dimensions:
| Models | Inlet | Outlet | A | B | C | D | E | F | Weight |
| CIR 150 | 2" - DN 50 threaded | 2" - DN 50 threaded | 370mm | 180mm | 285mm | 420mm | 250mm | 330mm | 22kg |
| CIR 200 | 3" - DN 80 threaded | 3" - DN 80 threaded | 370mm | 220mm | 290mm | 420mm | 250mm | 330mm | 24kg |
| CIR 300 | 3" - DN 80 threaded | 3" - DN 80 threaded | 370mm | 240mm | 300mm | 420mm | 250mm | 330mm | 25kg |
| CIR 550 | 4" - DN 100 threaded | 4" - DN 100 threaded | 466mm | 245mm | 291mm | 540mm | 290mm | 360mm | 37kg |
Optionals:
| Valves | Foot valve (2", 3" or 4") |
| Connections |
Professional straight brass connection in three pieces for inlet (2", 3" or 4") professional 90° brass connection 2" in three-pieces for outlet (2", 3" or 4") |
CIR 150-550 - REV. 2.0 - 10/09/2017
File di specifiche:
