C 400-550
Pompe centrifughe di superficie con girante in ottone, 2poli, da 4.0HP a 5.5HP,
Max prevalenza: 57m,
Max portata: 300L/min
Use |
Centifugal pumps with single impeller in brass for clean water. These models are usually used in industrial plants, for irrigations systems or to increase the water pressure in block of houses. These models are not suitable to pump dirty water. |
Operation conditions |
Max liquid temperature: 70 °C (158 °F) |
Performance curve:
Models | Capacity | |||||||||
L/min | 0 | 40 | 80 | 120 | 160 | 200 | 240 | 280 | 300 | |
m3/h | 0 | 2,4 | 4,8 | 7,2 | 9,6 | 12,0 | 14,4 | 16,8 | 18,0 | |
L/s | 0 | 0,67 | 1,33 | 2,00 | 2,67 | 3,33 | 4,00 | 4,67 | 5,00 | |
C 400 | Head (m) | 47 | 46 | 45 | 44 | 43 | 41 | 39 | 35 | 34 |
C 550 | 57 | 56 | 56 | 55 | 54 | 53 | 50 | 48 | 46 |
Technical characteristics:
Models | C 400 | C 550 |
Number of stages | 1 | |
Motor | Insulation class: F | |
Motor protection | By a fused remote isolator switch at customer's care (see optional electric board) for three-phase models | |
Mechanical seal | Mechanical seal in allumina / graphite / NBR | |
Capacitor | - | |
IP | 44 |
Electric characteristics:
Models | Power | Nos. poles | R.p.m. | Voltage | Ampere |
C 400 | 4HP - 3kW | 2 | 2850 | 230-400V/50Hz/3 | 14,0 A - 8,0 A |
C 550 | 5.5HP - 4kW | 2 | 2850 | 230-400V/50Hz/3 | 17,0 A - 10,0 A |
Materials:
Impeller | Brass |
Pump body | Cast-iron GG 20 |
Pump support | Cast-iron GG 20 |
Motor shaft | Stainless steel AISI 416 |
Packing set | NBR |
Weight and dimensions:
Models | Inlet | Outlet | A | B | C | D | E | F | Weight |
C 400 | 2" - DN 50 threaded | 1"1/4 - DN 32 threaded | 450mm | 250mm | 320mm | 470mm | 285mm | 355mm | 36kg |
C 550 | 2" - DN 50 threaded | 1"1/4 - DN 32 threaded | 450mm | 250mm | 320mm | 470mm | 285mm | 355mm | 38kg |
Optionals:
Connections |
Professional straight brass connection 2" in three pieces for inlet professional 90° brass connection 1"1/4 in three-pieces for outlet |
C 400-550 ITA - REV. 2.0 - 10/09/2017
File di specifiche: