SUPERJET 100

Pompa di superficie autoadescante con girante in ottone, 2 poli, 1.0HP,
Max prevalenza: 43m,
Max portata: 58L/min

 

Use

Self-priming pump with single impeller in brass for clean water. This model is usually used for small irrigations systems sucking the water from rivers or ponds or they are installed in small houses to increase the pressure of the water; in this case it is often connected to a pressure system. This model is not suitable to pump dirty water.

Operation conditions

Max liquid temperature: 50 °C (122 °F)

Max suction depth: 9m

 

 

Performance curve:

 

Model Capacity
L/min   0   10 20 30 40 50 60
m3/h 0 0.6 1.2 1.8 2.4 3.0 3.6
L/s 0 0.17 0.33 0.50 0.67 0.83 1.00
SUPERJET 100 Head(m) 43 39 36 30 24 14 3

 

Technical characteristics:

Number of stages 1
Motor Insulation class: F
Motor protection Automatic reset built-in thermal protection
Mechanical seal Mechanical seal in allumina / graphite / NBR
Capacitor  
IP 44

 

 

Electric characteristics:

Model Power Nos. poles R.p.m. Voltage Ampere
SUPERJET 100 1.0HP - 0.75kW 2 2850 230V/50Hz/1 4,5 A

 

 

Materials:

Impeller Brass                                                        
Pump body Cast-iron GG 20
Pump support Cast-iron GG 20
Diffuser Noryl                                                        
Motor shaft Stainless steel AISI 416 B
Packing set NBR

 

 

Weight and dimensions:

 

Model Inlet Outlet A B C D E F Weight
SUPERJET 100 1" - DN 25 threaded 1" - DN 25 threaded 425mm 185mm 200mm 440mm 220mm 240mm 17kg

 

 Optionals:

Valves 1" foot valve necessary for the priming of the pump
Connections

Professional straight brass connection 1" in three pieces for inlet

professional 90° brass connection 1" in three-pieces for outlet

Pressure system set Presscontrol
Manometer, pressure switch and expansion tank

 

SUPERJET 100 ITA - REV. 2.0 - 08/09/2017

Comex Srl Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.