SUPERSAND N 150
Pompa sommergibile in acciaio per drenaggio di acqua sabbiosa o fangosa, 2 poli, 1.5HP,
Max prevalenza: 17 m,
Max portata: 400 L/min
Description |
Pump in cast-iron and stainless steel AISI 304 for drainage. The suction grid at the base permits to position the pump at the bottom of a pond or of a hole into the ground as the stones and other solid parts cannot be suck by the pump. Thanks to its heavy duty construction the SUPERSAND 150 is a pump ideal also for hard applications. The impeller and the volute of the impeller are in cast-iron with an high percentage of chrome to grant an extremely high resistance against abrasion. |
Use |
Suitable for sandy water and muddy water. This model is usually used by contractors to drain water by the foundations or to dewater small ponds. Thanks to its upper discharge this model can work even if the water level is low (up to 85mm from the ground). |
Operation conditions |
Max liquid temperature: 40 °C (104 °F) pH: 6-13 Max density: 1100 kg/m³ Max immersion depth: 30m |
Performance curve:
Model | Head (m) | ||||||||
2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | ||
Capacity | |||||||||
SUPERSAND N 150 | L/min | 400 | 378 | 360 | 342 | 300 | 255 | 193 | 90 |
m3/h | 24,0 | 22,7 | 21,6 | 20,5 | 18,0 | 15,3 | 11,6 | 5,4 | |
L/s | 6,67 | 6,30 | 6,00 | 5,70 | 5,00 | 4,25 | 3,22 | 1,50 |
Technical characteristics:
Outlet | 2" - DN 50 vertical threaded With hose connector |
Solid passage | 8mm |
Impeller | Multi-channel open impeller |
Mechanical seal |
Double indipendent mechanical seal in oil chamber. The lower one in silicum carbide / silicum carbide / NBR, the upper one in ceramic / graphite / NBR + NBR oil seal |
Motor | Dry. Insulation class: F |
Motor protection | Automatic reset thermal protection |
Float-switch |
The pump is supplied without float-switch |
Cable |
10 meters cable H07RNF 3G1.5 without plug |
Capacitor | Start capacitor: 100μF - 250V, running capacitor: 10μF - 450V. |
IP | 68 |
Electric characteristics:
Model | Power | Nos. poles | R.p.m. | Voltage | Ampere |
SUPERSAND N 150 | 1.5HP - 1.1kW | 2 | 2850 | 230V/50Hz/3 | 8,2 A |
Materials:
Impeller | Cast-iron GG 25 + chrome, tempered (hardness against abrasion: RC60) |
Casing cover | Cast-iron GG 25 + chrome, tempered (hardness against abrasion: RC60) |
External cover | Stainless steel AISI 304 |
Motor frame | Cast-iron GG 25 |
Footing | Cast-iron GG 25 |
Bottom strainer | Stainless steel AISI 304 |
Motor shaft | Stainless steel AISI 403 |
Packing set | NBR |
Weight and dimensions:
Model | Outlet | Dimensions (mm) | Weight | ||||
threaded | A | B | C | D | E | (kg) | |
SUPERSAND N 150 | 2" - DN 50 | 482 | 210 | 250 | 280 | 510 | 28 |
Optionals:
Treatment | Epoxy-bituminous coating to protect the pump against salty water corrosion and to increase the resistance against abrasion |
Connections | Straight DN 50 hose connector supplied with the pump |
Flat PVC hoses | Flat type PVC hoses (fire brigades type) DN50 |
No-return valve | Professional ball check valve threaded 2"-DN50 in cast-iron |
Float-switch | 10 or 20 metres cable float-switch to be connected to an electric board |
Electric board | The electric board model F5-0.5/3-1 provides a manual reset thermal protection to protect the motor of the pump and it permits the connection of a float-switch. |
SUPERSAND N 150 ITA - REV. 2.0 - 29/08/2017