| Description |
Pump in cast-iron for drainage. The suction grid at the base permits to position the pump at the bottom of a pond or of a hole into the ground as the stones and other solid parts cannot be suck by the pump. Thanks to its heavy duty construction and the top quality oil bathed motor the SAND 100 is a pump ideal also for hard applications. In case an electrical problem occurs, the reparation of the pump is extremely easy because the electric connections and the capacitor are positioned under the cover and completely isolated from the motor; so if some water enters into the pump from a cut in the cable the motor will be safe. |
| Use |
Suitable for drainage water and sandy water. This model is much used by contractors by construction sites to drain water from foundations or to dewater small ponds. |
| Operation conditions |
Max liquid temperature: 50 °C (122 °F) pH: 6-10 Max density < 1100 kg/m³ Max immersion depth: 5m |
Performance curve:
| Model | Head (m) | ||||||
| 2 | 4 | 6 | 8 | 10 | 12 | ||
| Capacity | |||||||
| SAND 100 | L/min | 315 | 270 | 220 | 170 | 100 | 40 |
| m3/h | 18,9 | 16,2 | 13,2 | 10,2 | 6,0 | 2,4 | |
| L/s | 5,25 | 4,50 | 3,67 | 2,83 | 1,67 | 0,67 | |
Technical characteristics:
| Outlet | 1"1/2 - DN 40 horizontal threaded |
| Solid passage | 5mm |
| Impeller | Bi-channel open impeller |
| Mechanical seal | Mechanical seal in silicum carbide / allumina / NBR + NBR oil seal |
| Motor | Oil bathed. Insulation class F. |
| Motor protection | Automatic reset built-in motor protection |
| Float-switch |
The model can be supplied with or without float-switch |
| Cable |
10 meters cable H07RNF 3G1 with plug |
| Capacitor | 14μF - 450V |
| IP | 68 |
Electric characteristics:
| Model | Power | Nos. poles | R.p.m. | Voltage | Ampere |
| SAND 100 | 1.0 HP - 0.75kW | 2 | 2850 | 230V/50Hz/1 | 5,0 A |
Materials:
| Impeller | Cast-iron GG 20 |
| Pump cover | Cast-iron GG 20 |
| Motor case | Cast-iron GG 20 |
| Pump body | Cast-iron GG 20 |
| Pump support | Cast-iron GG 20 |
| Motor shaft | Inox AISI 420B tempered |
| Packing set | NBR |
Weight and dimensions:
| Model | Outlet | Dimensions (mm) | Weight | ||||
| female threaded | A | B | C | D | E | (kg) | |
| SAND 100 | 1"1/2 - DN 40 | 410 | 165 | 230 | 200 | 470 | 23 |
Optionals:
| Connections | Professional 90° brass connection 1"1/2 in three pieces |
| Standard 90° plastic connection 1"1/2 in one piece | |
| Coupling foot | MODEL 1-1"1/2: automatic coupling foot with 1"1/2 connection |
| No-return valve | Professional ball check valve threaded 1"1/2 in cast-iron |
| Float-switch | 10 or 20 metres cable float-switch to be connected to an electric board in case it is not possible to use the standard float-switch connected to the pump |
| Electric board | Model F5-0.5/3-1 that provides a manual reset thermal protection to protect the motor of the pump and it permits the connection of a float-switch. |
SAND 100 ITA - REV. 2.0 - 29/08/2017
File di specifiche:
