VORTEX 550-750

Pompe sommergibili professionali in ghisa per acque sporche, 4 poli, from 5.5HP a 7.5HP,
Max prevalenza: 18 m,
Max portata: 3.000 L/min

 

Description

Pumps in cast-iron with single-channel impeller. This kind of impeller grants a good free passage for the solid and fibrous parts contained into the water but it gives also an higher flow and head than the "vortex" impeller. These models with an heavy duty construction, double mechanical seals and 1450 rpm motor can be used to pump heavy sewage water.

Use

The VORTEX 550 and VORTEX 750 are usually installed into big block of flats' cellars to drain the dirty water or in public sewage water nets. These models are also often used in farms to pump out the manure of the stables, in industrial plants, in sewage water treatment plants, in sludges treatment plants, etc. These models cannot be used to pump water containing stones.

Operation conditions

Max liquid temperature: 50 °C (122 °F)

pH: 6-10

Max density < 1100 kg/m³

Max immersion depth: 20m

  

 

Performance curve:

Models Head (m)
2 4 6 8 10 12 14 16 18
Capacity
VORTEX 550 L/min 2496 2240 1990 1590 1240 900 490 0  
m3/h 149,8 134,4 119,4 95,4 74,4 54,0 29,4 0  
L/s 41,6 37,33 33,17 26,50 20,67 15,00 8,17 0  
VORTEX 750 L/min 3000 2750 2493 2200 1780 1480 1000 500   0  
m3/h 180,0 165,0 149,6 132,0 106,8 88,8 60,0 30,0 0
L/s 50,00 45,83 41,55 36,67 29,67 24,67 16,67 8,33 0

 

 

Technical characteristics:

Outlet 4" - DN 100 horizontal flanged
Solid passage 90mm
Impeller Single-channel impeller
Mechanical seal

Double mechanical seal in oil chamber. The lower one in silicum carbide / silicum carbide / Viton, the upper one in ceramic / graphite / NBR.

Motor Dry. Insulation class: F.
Motor protection By a fused remote isolator switch at customer's care (see optional electric board)
Float-switch

The pump is supplied without float-switch

Cable

10 meters cable H07RNF 10x1.5mm2 including thermal probe and conductivity probe, without plug

Capacitor -
IP 68

 

 

Electric characteristics:

Models Power Nos. poles R.p.m. Voltage Ampere
VORTEX 550   5.5 HP - 4.0kW 4 1450 400-690V/50Hz/3 9,1 - 5,5 A 
VORTEX 750 7.5 HP - 5.5kW 4 1450 400-690V/50Hz/3 11,5 - 7,5 A 

 

 

Materials:

Impeller           Cast-iron GG 25                                                                             
Pump cover Cast-iron GG 25
Motor case Cast-iron GG 25
Pump body Cast-iron GG 25
Pump support Galvanized iron
Motor shaft Inox AISI 420
Packing set NBR

 

 

Weight and dimensions:

  

Models                 Outlet                       Dimensions (mm)                  Weight  
flanged A B C D E F (kg)
VORTEX 550 4" - DN 100 650 450 212 470 400 620 97
VORTEX 750 4" - DN 100 650 450 212 470 400 620 103

 

Optionals:

Connections 4"-DN 100 counterflange
DN 100 90° coupling hose in cast-iron with flange
Coupling foot MODEL 4-DN100VTX400-750: automatic coupling foot with DN100 connection for VORTEX 400-750 
No-return valve Professional ball check valve flanged 4"-DN100 in cast-iron
Float-switch 10 or 20 metres cable float-switch to be connected to an electric board
Electric board Professional electric board model F1-5.5-3 or F1-7.5-3. This electric board provides a manual reset thermal protection to protect the motor of the pump and it permits the connection of a float-switch. Moreover this electric board has a control of lack or invertion of phases. The connection of the three-phase pump to an electric board is mandatory.

 

 

VORTEX 550-750 ITA - REV. 2.0 - 29/08/2017

Comex Srl Società Unipersonale, Via delle Industrie, 42 - 31057 Silea (TV) - ITALY
P.I.: 00345210264 - Cap. Soc.: 50.000€ i.v.